Metallum Glandulae Multi-hole
Metallum Glandulae Multi-hole
Introductio
Fibulae glandulae maxime adhibendae sunt, figere, ab aqua et pulvere retinacula tueri.Late applicantur ad tales agros ut tabulas, apparatus, luminaria, instrumenta mechanica, comitatus, motores, incepta etc.Glandulae metallicae funis e nickel-aeris inauratis (Order No.: HSM/nxd), ferro immaculato (Ordo No.: HSMS/nxd) et aluminium (Ordo No.
Nxd: N refertur ad numerum foraminum, D refert ad foramen diametri.
| Materia: | Corpus: nickel-patella aes;sigillum: polyamide;signantes: mutatio rubber |
| Temperatus dolor: | Min -40℃,Max 100℃,Breve tempus 120℃ |
| Praesidium gradum: | IP68 congruo o-anulo in certo clamping range |
| Possessiones: | Resistentia ad vibrationem et ictum, secundum IEC-60077-1999. |
| Applicationes: | Apparatus aedificium, instrumentum electricum, armarium electricum imperium |
| Testimonia: | CE |
Specification
(Quaeso nobis contactum pro maiori informatione, si alias quantitates in hoc indice inclusas non indiges.)
[Metric/Pg/Npt/G stamina praesto sunt.]
| Glandula aenea Nickel-patella (stamina metrica) | |||||||
| Articulus nullus. | Thread | Foraminis magnitudine | AG | GL | H | SW1/SW2 | Packet |
|
| Dimension | mm | mm | mm | mm | mm | Unitates |
| HSM-M16/4×1.4 | M16×1.5 | 4×1.4 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M16/2×3 | M16×1.5 | 2×3 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M18/2×3 | M18×1.5 | 2×3 | 18 | 7 | 21 | 17/20 | 32 |
| HSM-M18/4×3 | M18×1.5 | 4×3 | 18 | 7 | 22.5 | 20/20 | 32 |
| HSM-M18/2×4.5 | M18×1.5 | 2×4.5 | 18 | 7 | 22.5 | 20/20 | 32 |
| HSM-M20/3×2.5 | M20×1.5 | 3×2.5 | 20 | 7 | 23 | 20/22 | 32 |
| HSM-M20/6×3 | M20×1.5 | 6×3 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20/3×4 | M20×1.5 | 3×4 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20/2×5 | M20×1.5 | 2×5 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M25/4×6 | M25×1.5 | 4×6 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-M25/3×7 | M25×1.5 | 3×7 | 25 | 7 | 26 | 28/30 | 18 |
| HSM-M25/2×8 | M25×1.5 | 2×8 | 25 | 7 | 26 | 28/30 | 18 |
| HSM-M32/6×6.5 | M32×1.5 | 6×6.5 | 32 | 8 | 33 | 40/40 | 8 |
| HSM-M32/4×9 | M32×1.5 | 4×9 | 32 | 8 | 33 | 40/40 | 8 |
| HSM-M40/5×9 | M40×1.5 | 5×9 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM-M40/7×9 | M40×1.5 | 7×9 | 40 | 9 | 38.5 | 50/50 | 4 |
| *HSM-M40/6×8 | M40×1.5 | 6/8 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM-M40/2×15 | M40×1.5 | 2×15 | 40 | 9 | 38.5 | 50/50 | 4 |
| *HSM-M63/8×10 | M63×1.5 | 8×10 | 63 | 10 | 41 | 58/70 | 2 |
| HSM-M63/6×12 | M63×1.5 | 6×12 | 63 | 10 | 41 | 58/70 | 2 |
| HSM-M63/4×19 | M63×1.5 | 4×19 | 63 | 10 | 44.5 | 75/75 | 2 |
|
|
|
|
|
|
|
|
|
| Glandula aenea Nickel-patella (PG thread) | |||||||
| Articulus nullus. | Thread | Foraminis magnitudine | AG | GL | H | SW1/SW2 | Packet |
|
| Dimension | mm | mm | mm | mm | mm | Unitates |
| *HSM-P09/4×1.4 | PG9 | 4×1.4 | 15.2 | 7 | 22 | 17/17 | 75 |
| HSM-P09/2×3 | PG9 | 2×3 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-P11/2×3 | PG11 | 2×3 | 18.6 | 7 | 21 | 17/20 | 32 |
| *HSM-P11/2×4.5 | PG11 | 2×4.5 | 18.6 | 7 | 22.5 | 20/22 | 32 |
| *HSM-P13.5/3×2 | PG13.5 | 3×2 | 20.4 | 7 | 23 | 22/22 | 32 |
| HSM-P13.5/6×3 | PG13.5 | 6×3 | 20.4 | 7 | 24 | 22/22 | 32 |
| HSM-P13.5/3×4 | PG13.5 | 3×4 | 20.4 | 7 | 23.5 | 22/22 | 32 |
| *HSM-P16/3×3 | PG16 | 3×3 | 22.5 | 7 | 23 | 22/24 | 32 |
| * HSM-P16/3×4 | PG16 | 3×4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/4 4 | PG16 | 4×4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/5×4 | PG16 | 5×4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/6×4 | PG16 | 6×4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/2×6 | PG16 | 2×6 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P21/4×6 | PG21 | 4×6 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P21/3×7 | PG21 | 3×7 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P21/2×8 | PG21 | 2×8 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P29/6×6.5 | PG29 | 6×6.5 | 37 | 8 | 33 | 36/40 | 8 |
| HSM-P29/4×9 | PG29 | 4×9 | 37 | 8 | 33 | 40/40 | 8 |
| HSM-P36/5×9 | PG36 | 5×9 | 47 | 9 | 38.5 | 50/50 | 4 |
| HSM-P36/7×9 | PG36 | 7×9 | 47 | 9 | 38.5 | 50/50 | 4 |
| *HSM-P36/6×8 | PG36 | 6/8 | 47 | 9 | 38.5 | 50/50 | 4 |
| HSM-P36/2×15 | PG36 | 2×15 | 47 | 9 | 38.5 | 50/50 | 4 |
| *HSM-P48/8×10 | PG48 | 8×10 | 59.3 | 10 | 41.5 | 58/65 | 2 |
| HSM-P48/6×12 | PG48 | 6×12 | 59.3 | 10 | 41.5 | 65/65 | 2 |
| HSM-P48/3×18 | PG48 | 3×18 | 59.3 | 10 | 41.5 | 65/65 | 2 |
